Skip to main content
Stesso

Introduction to Chalky Surfaces and Preparation Methods

0:01
8:09
34.2K views

At 0:01 in

Painting Chalky Surfaces! How to make your paint adhere better!

Watch on YouTube

What happens here

This initial phase introduces the common problem of painting over chalky surfaces, which can lead to poor adhesion and premature paint failure. The presenter emphasizes that proper preparation is crucial. Two main methods for dealing with chalkiness are outlined: power washing for large areas (like houses) using a rotating agitating nozzle, or manual scrubbing and cleaning for smaller surfaces like the metal door demonstrated in the video. An additive called Flood EB Emulsa Bond is also mentioned as a solution if some chalkiness persists after cleaning, as it improves paint adhesion to such surfaces.

Goal: Understand the importance of surface preparation for chalky surfaces and available methods.

Tools and materials

  • Power Washer — Removing chalkiness from large surfaces
  • Rotating Agitating Nozzle — Enhancing power washer effectiveness on chalky surfaces
  • Flood EB Emulsa Bond Flood — Additive to paint for improved adhesion on chalky surfaces

What they say

Hide

hey this is chris the idaho painter here on paint live tv today i got a little a short video for you and this is about dealing with chalky surfaces and this will i'm kind of apply to um houses or work actually show you a door a metal door that's extremely chalky how i dealt with it and how i went about painting it so if you run into this don't paint over chalky surfaces without prepping it properly there's one method you can do and you can just really power wash this using a rotating agitating nozzle to get all that chalkiness off or you can just scrub it and clean it by hand this door was a small door didn't have access to um water and a power washer where i could power wash it and make it fast and easy so i just wiped it down with some simple products a product called crud cutter and walk you through that process now if i had a large house to do i'm just going to power wash that thing using an agitating nozzle and it rotates and agitates and it cleans really well and i've had a whole lot of success painting chalky surfaces just doing that if you get to the point where it's still a little bit chalky and you're uncomfortable try emulsifying add that to your paint and it it's an additive to paint that makes paint bond to chop these surfaces a lot better but here's some tips and tricks painting a chalky surface coming your way

Auto-generated from the video audio.