Attach Joist Hangers to Ledger Board
At 0:00 in
November 25, 2023
What happens here
Begin by positioning a metal joist hanger against the ledger board (the main beam attached to the structure) or beam where a joist will be supported. Ensure the hanger is flush against the wood and correctly aligned, typically with its top edge even with the top edge of the ledger board or slightly below, depending on the framing plan. The video shows the worker holding the joist hanger in place while operating a DeWalt pneumatic nail gun. Use a pneumatic nail gun loaded with appropriate structural nails (e.g., 1-1/2 inch or 2-1/2 inch hot-dipped galvanized or stainless steel connector nails, as specified by local building codes and the hanger manufacturer) to secure the hanger. Drive nails into all designated holes on the flange that attaches to the ledger board. The nail gun rapidly drives multiple nails, ensuring a strong connection. Repeat this process for all required joist hanger locations.
Goal: Secure joist hangers to the ledger board or beam.
Tools and materials
- Ledger Board — The main wooden beam to which the joist hangers are attached, typically fastened to a house structure
- Metal Joist Hangers Simpson Strong-Tie — Providing structural support for floor or deck joists where they connect to a ledger board or beam
- Pneumatic Nail Gun DeWalt — Driving structural nails quickly and efficiently into the joist hangers and framing
- Safety Glasses — Protecting eyes from projectiles and debris when operating power tools
- Structural Connector Nails — Securing the joist hangers to the wooden framing. Must be sized and rated for the hanger type