Skip to main content
Stesso

Install Circuit Breaker onto Busbar

0:30
1:55
69.1K views

At 0:30 in

My Dad who is a Master Electrician shows how to Install a Commercial 3-Phase Breaker, Thoughts?

Watch on YouTube

What happens here

With the captive screws properly adjusted, align the circuit breaker with an available slot on the side busbar within the electrical panel. Firmly push the breaker onto the busbar until it audibly 'snaps' into place. This action physically connects the breaker to the panel's power distribution system, securing it mechanically before the electrical connection is tightened.

Goal: Securely attach the circuit breaker to the electrical panel's busbar.

Tools and materials

  • Electrical Panel Unspecified — The main distribution board where the breaker is installed

What they say

Hide

properly. Now that I did that, I'm going to make sure it's off. So, what I'm going to do is I'm going to locate this side bar. Now, they're captive screws, so they're going to stay in there. And I want to make sure they're not too sticking out and I'm going to push in on the side bar till it snaps in. Now, this is what a lot of rookies do. They use a drill. You do not use a drill unless you are a journeyman. Okay. Why is that? Because these are aluminum and copper, very

Auto-generated from the video audio.