Apply Soft Interface Pad on Contours

mostly these are used with of course all the time sorry not mostly but all the time with our sheet goods and the reason we have these is because the foam is great when you're talking in the Finish room on prime or anything like that it is the best the speediest way to sand between coats but a lot of times we'll get in areas where there may be you need a little bit more aggressive I know with conversion varnish that had been a problem with us in the past just some rougher surfaces and when we get into that we can't always use the phone because it doesn't flatten it out and that's the big thing is that if you've got a rough finish it doesn't matter if you sand it if it's still rough when you put your next coat you're going to still see that roughness so the interface pads gives us ability to to replicate the foam but with a conventional abrasive so this is the softer version this is the the soft 10 millimeter and it'll actually if you need to get down you can see this pillow top we don't want a flat spot but we can actually wrap into that pillow top right we have to be careful though because again while that doesn't level this does so you kind of you got to keep yourself off of The Edge work right this probably