Conduct Test with Snap-on Power Ratchet

What happens here

With the test fixture ready, retrieve the Snap-on power ratchet (distinguishable by its yellow casing in the video). Position the ratchet head securely onto a nut of a pre-tightened 6-inch bolt. Initiate the power ratchet and start a timer simultaneously. Allow the tool to operate until the bolt is fully removed or disengaged from the fixture. Record the total time taken. The demonstration implies the Snap-on tool took approximately 60 seconds for this task.

Goal: Measure the bolt removal time for the Snap-on power ratchet.