Skip to main content
Stesso

Cut Diagonal Deck Boards

5:30
19:18
5.9K views

At 5:30 in

Mastering the Deck Layout! -THE GLASS HOUSE EP 5

Watch on YouTube

What happens here

This deck features a unique diagonal layout which requires precise angle cuts. Using a circular saw (DeWalt), cut the composite deck boards to the necessary angles as marked. The speaker demonstrates cutting small pieces to fit tightly into a corner, creating a clean, seamless transition for the diagonal pattern. This precise cutting is critical for the aesthetic appeal of the diagonal design.

Goal: Precisely cut composite deck boards for the diagonal pattern.

Tools and materials

  • Circular Saw DeWalt — Cutting deck boards to precise angles
  • Composite Deck Boards Deckorators — The main surface of the deck
  • Pencil — Marking cut lines
  • Safety Glasses — Protecting eyes during cutting
  • Tape Measure — Measuring cuts

What they say

Hide

>> All right. Sean, you're going to deck by deck board by deck board cutting it in? Deck board by deck board. What is that? The hell was all that noise? Is that a hawk? >> It just flew up into that tree. Um >> Yeah, it's not that serious, pal. All right, so uh wanted to get this first one cut cuz we'll be coming into this corner with the track saw and we won't be able to go all the way to the end. So, we can uh mark this out. Let's see, we'll be at uh 2 in with our overhang. So, our 5 and 1/2 3/16 gap. So, if we get this >> [snorts] >> hopefully right here, we want that to be the center of our gap. So, we should be good there. And yeah, we're looking pretty good. Beautiful. [snorts] Beautiful. All right, so we can go ahead and get these get this first one fastened and [snorts] then we'll just uh we'll just clip and clip and roll. Clip and rock and clip and roll. Clip and we'll lay all these boards down. That's what we'll do. >> [music]

Auto-generated from the video audio.