Skip to main content
Stesso

Efficient Doorknob Masking

5:54
7:38
30.7K views

At 5:54 in

Masking to spray with an airless sprayer. Idaho Painter spraying tips.

Watch on YouTube

What happens here

The presenter continues to mask another doorknob, emphasizing the same technique: applying green FrogTape neatly around the base of the doorknob, then using the masking tool to attach masking paper and wrap it securely around the entire knob. He stresses the importance of not using too much tape or paper, as excessive material can be difficult to remove quickly after spraying. The goal is efficiency and a clean removal, allowing the painter to simply grab one end and pull off all the masking in one swift motion.

Goal: Mask a doorknob efficiently with minimal tape and easy removal.

Tools and materials

  • FrogTape — Creating the clean edge around the doorknob
  • Handheld Masking Tool — Dispensing and applying tape and paper
  • Masking Paper Roll — Covering the doorknob

What they say

Hide

on the doorknob we don't want to go on to the wood we're gonna be like a sixteenth of an inch onto the metal repeating a nice line using green frog tape and i'm just gonna push down with my fingers i'll make it get a good seal nine inch paper one inch tape and wrap this twist it just like this and squeeze it i'm not going to wrap any more tape around that because what i call some of you have tested a christmas wrap it put too much tape it takes too long to get it off when you're done spraying i like to be able to just grab one in and just pull it off just like that it comes off really fast if you do it like that twist it small it'll stay if you squeeze it it's going to stay like that plunger if you're not removing the doorknob again this is not you know sake of argument at all some people are going to say that's the ultimate sin not removing the doorknob but you gotta gotta be open-minded to different scenarios different situations we typically would remove it but in this

Auto-generated from the video audio.