Masking Gas Pipe and Meter

That's your electrical outlet right there that we would typically remove. We have this is a um pipe right here that is a gas pipe for you know something maybe like a gas barbecue. So you have the option we've got it's starting to rust on the end. We can paint the thing. We don't want to paint this handle. It identifies what it is. You have the option of masking off just the handle or I can mask off the pipe, the whole pipe itself. I'll wrap some paper around that. Tuck that in. And that's how that is masked off right there. So, this is masked off. All this this won't get any overspray on it. If you're concerned about overspray falling on this, I can take some plastic. I can drape some plastic over it if I want in this fashion right here. I'll just take some plastic, tack it around, pull this up and over. I wouldn't be concerned about it myself, but you might be concerned about it. So, you might want to mask it off. So, I'm going to drop some plastic over that. So, now overspray is not going to get on there. Just tack that down so that doesn't blow around in the wind. And now your gas fixture is protected also. So, I have a water spet. I do have a light.