Attach Plastic to Door Jamb (Second Side) and Seal

Same side, I'm batch doing things. So I'm gonna do the opposite side. So you're gonna take your plastic, find your plastic, your short end. This is the opposite side. So, short end, get it up here, tack it. Get just the end of it, tack it, get it up in there. Fold it, press it, just the end. Don't get it too far. Tack it, tack it, be stuck it. And your door jam, just pop it back out, tack it. All the way up. I'm gonna take seam. Here's you gotta seam right here, exposed. This would be a leak. So we take tack it to the tape right here, cover the seam, opposite side. We begin again, doing the same thing. So now opposite side, I come up here. That's why you make sure you never wanna be short. It's better to be too long, cause all I'm gonna do is roll it like this. And this takes up all the excess, bomb, tack it. So I'm getting it up here, stretching it out. Now I'm tacking it. Now I want this all tight, cause I don't want it, but we call flopping in the wind with the sprayer. So I'm rolling it underneath, tacking it. Rolling it underneath. You don't wanna roll it out, cause then it's gonna like flap out. So now I've got nice tight plastic.