Skip to main content
Stesso

Gather Materials and Cut Plywood

1:04
13:49
461.5K views

At 1:04 in

Making Built-In shelves

Watch on YouTube

What happens here

Begin by selecting 3/4 inch maple plywood. The creator recommends maple or birch plywood for its smooth finish and minimal imperfections, which is ideal when planning to paint or stain. Carefully measure and cut the plywood sheets into the required dimensions for the shelf components. Use a table saw to make precise cuts, including 45-degree bevel cuts along the edges that will form the front of the floating shelves. Ensure you have extra material for test cuts and samples.

Goal: Select 3/4 inch maple plywood for its ease of finishing and cut the main pieces for the shelves using a table saw, ensuring precise 45-degree bevel cuts for the floating shelf design.

Tools and materials

  • 3/4 inch Maple Plywood
  • Measuring Tape
  • Pencil
  • Table Saw

What they say

Hide

to the shop so I'm using a 3/4 inch maple plywood why am i using maple ply it's specifically because maple and birch is some of the most easily accessible plywood at your local hardware store number one number two maple and birch have the least amount of intersections when it comes to painting it or staining it it's gonna look a lot more flawless than some of the other stuff you'll find out your hardware store [Music] hi folks here's a fun trick for you if you don't have one little stance a little digital minor gauges here's what you can do 45 degrees right here we got it 7:45 there you go don't I figure that thing [Music] yeah FUS a that was a little sketch cutting that and so I want you guys to be safe if you don't have a nice sturdy table saw like that and a couple of jigs to hold it in like that I attempt to do that narrow so this is a two and a half inch piece be safe go thicker get four inches oranges will be safe enough for you to cut on a little contractor table saw no problem so just be safe guys

Auto-generated from the video audio.