Skip to main content
Stesso

Setting Up and Adjusting Batter Boards

0:22
2:02
916.4K views

At 0:22 in

Layout and squaring 💪 Learn the first steps before building. #carpentry #construction #learn

Watch on YouTube

What happens here

The video demonstrates a practical application of batter boards. Wooden batter boards, typically made from lumber, are set back from the actual building line. String lines are then stretched between nails driven into these batter boards. The further back the batter boards are set from the structure, the more room there is to work within the perimeter (e.g., for digging). If the initial string line setup is not square, the nails holding the string on the batter board can be adjusted by sliding them along the board to square up the lines.

Goal: Position and adjust batter boards for practical layout

Tools and materials

  • Batter Boards — Providing a stable frame to run string lines for site layout
  • Nails N/A — Securing the string lines to the batter boards
  • String Line — Defining the edges and corners of the structure

What they say

Hide

method for this is batter boards. These boards get installed on the outside of your structure so you can run string lines and find your corners. If any digging has to be done or lines removed, it's a lot easier to do with this setback. The further back, the easier it will be to work in this area. If you find that your line isn't square, you can move to square up your lines. The objective is to get 90° corners and parallel walls. The first most reliable method is a 3-4-5 method or the

Auto-generated from the video audio.