Cure Coating and Perform Final Inspection

What happens here

After applying the coating around the light fixture, it is critical to allow ample time for the coating to fully cure according to the manufacturer's specific instructions for the product used. Curing times can vary significantly based on the type of coating, temperature, and humidity. Once the coating has completely cured, carefully remove any painter's tape that was used to mask off the light fixture or surrounding areas. Conduct a final visual inspection of the coated area to ensure there are no missed spots, uneven patches, drips, or other imperfections. This step ensures a durable finish and that the entire pool resurfacing project maintains a high quality before refilling the pool.

Goal: Ensure the coating is fully cured and the finish is flawless before refilling the pool.