Inspect, Clean, and Remove Masking

What happens here

After the coating has been applied and has had sufficient time to dry to the touch (refer to product instructions for specific drying times), carefully inspect the entire sprayed area for any missed spots, drips, or uneven coverage. Address any imperfections with a small brush or by applying another light coat if necessary. Once satisfied with the application, begin the cleanup process. Clean the airless paint sprayer, hose, and spray gun according to the manufacturer's guidelines, typically involving flushing with water (for latex paints) or appropriate solvents (for oil-based paints). Finally, carefully remove all masking tape and paper/plastic sheeting from windows, ground, and other protected surfaces. Remove the masking while the paint is still slightly pliable but mostly dry to prevent peeling.

Goal: Ensure a clean, finished appearance and proper equipment maintenance.