Skip to main content
Stesso

Initial Spray Test and Overspray Analysis

0:00
1:05
10.1K views

At 0:00 in

Is the overspray just to much 🫣👇#toolsofthetrade #tools #airless #youdecide #diy

Watch on YouTube

What happens here

The video begins with the demonstrator using a paint sprayer equipped with a Titan Spray Guide to spray paint a section of a wall. After a short spray, he stops and removes the device to reveal the sprayed area. He points out a significant amount of overspray and blow-by paint on the wall above the intended line, despite the device being designed to prevent this. He acknowledges a somewhat crisp line where the guide was, but emphasizes the extensive overspray.

Goal: Conduct an initial spray test with the Titan Spray Guide and observe its performance regarding overspray.

Tools and materials

  • Paint Sprayer — Applying paint to the wall
  • Titan Spray Guide Titan — Guiding the paint sprayer to create a clean edge
  • Black Paint — The paint being applied during the demonstration

What they say

Hide

So, there's my line. You can see there's a lot of overspray on the opposite side. Yeah, you do have a nice crisp edge right here. Well, kind of, but you have a lot of overspray and blow-by going by the device. You can see up in my corners there's a lot of overspray in the corners. The device does say that it eliminates the need for masking and cutting in by hand, and it does it

Auto-generated from the video audio.