Installing A New 1/4 Turn Style Valve In Your House #diy #helpingothers #plumbing

got the barrel exposed, and then nut. So we can try a couple different methods to taking this off. The first is the Replum method. By taking these pliers, grabbing the barrel and wiggling back and forth. If that doesn't work, you can use a hacksaw and split the nut, remove it, or you can get a tool like one of these feral pullers, clean up your pipe, grab a new valve, preferably quarter turn, nut, put on a new feral, always like to put a little mega lock on. You'll feel it start to tighten and get nice and hooked up there. This valve comes with a 3-8 nut and feral, but we are going to be hooking this back up with a braided flex supply line hand tight at no more than one full turn afterwards. Turn the water back on, give it a test. We're back in business. That is how you change out the old multi turn style valve and install a quarter turn.