Skip to main content

Installing a 300 AMP Service for a Church, and a Full Building Re-wire, how much would you charge?

1:08
18.9K views

Video by Hendy The Sparky

Hendy The Sparky

What happens here

This video showcases a professional electrical service upgrade for a church, moving from outdated 1900s Bryant panels to a new 300 amp service with modern Eaton panels. It highlights the replacement of old, hazardous electrical components, the installation of new panels with surge protection, and the routing of new service lines. The video also briefly touches upon the extensive additional electrical work required throughout the church for lighting and outlets, posing a question to viewers about the appropriate charge for such a comprehensive electrical project.

Transcript

Hide

Look at all those bees in there. All right, guys, we just installed a 300 amp service for a church. So, the Lord called and said he needed an emergency service call and said that he needed electrical panels installed. So, we had to do it for the Lord. So, [music] we have a 150 amp panel right here and another 150 amp panel right here. These two panels equaling 300 amps and you can see our wires are being fed through this trough and it's going outside in a 2 and 1/2 inch rigid conduit going in a overhead 300 amp service. And guys, this church we knew we had to do God's work. We also installed surge protectors in both the panels. This church needs a lot of work done as you can see. So, they called us to get a job done and we will not let the Lord down. So, what I'm going to do is I'm going to give an estimate to get all these lights on in the church, uh get all the outlets running, and [music] get everything wired up. So, how much would you charge for a job to wire up a whole church?

Auto-generated from the video audio.