Fill Imperfections with Putty and Spackle

begin filling we start filling we use bondo glazing putty or spackle i'll use spackle for anything large i'll use bondo glazing putty for anything small and i do have a video you know explaining when what i use and win on uh both of these products here that you can check that out another time so i'm just cruising right along you can use put your bondo glazing putty on a piece of cardboard if you're doing a lot of filling if you're doing a little bit you can just put it right on your knife you can see i'm going to be filling these seams right here i've got the seams on my doors which show up it's good to fill those seams in if i'll flip it over these are where the hinges were it left marks because the previous hinges were put on when the coating was still wet but i can flip this over i got some seams right here and i want these seams to be gone i want this finish to be absolutely flat and this is the benefit of using an inspection light it's going to show you all this stuff that you need to fill and then we're going to begin sanding