Skip to main content
Stesso

Complete Pump Extraction and Component Identification

0:30
1:05
5.9K views

At 0:30 in

Incredible what we found in this well! We pulled this we’ll pump up that was still working! Age?

Watch on YouTube

What happens here

Following the disconnection of pipe sections, the worker continues the extraction, bringing the entire submersible well pump assembly fully out of the well. The pump, like the pipe, is heavily coated in rust and mineral deposits. Once extracted, the worker visually inspects the pump, pointing out its key components: the main pump body, the electrical motor, and the inlet screen, which filters water entering the pump.

Goal: Fully remove the well pump and visually inspect its parts.

Tools and materials

  • Inlet screen — The filter at the pump's intake, part of the extracted assembly
  • Submersible well pump — The device that pumps water, now fully extracted
  • Well motor — The power unit for the pump, part of the extracted assembly
  • Well pipe — The pipe to which the pump is connected, now fully extracted

What they say

Hide

>> Yeah, like that. There should be. >> So that's what a well pump looks like. >> Yeah. This is the pump and that's the motor and that's the inlet screen.

Auto-generated from the video audio.