Skip to main content
Stesso

Support Post Removal

4:17
57:32
143.4K views

At 4:17 in

I Built the Ultimate Open-Concept Patio for Entertaining

Watch on YouTube

What happens here

Carefully remove the existing wooden posts that supported the old lattice walls. First, verify if the posts are load-bearing by checking their connection to the roof structure and tapping them to assess their structural integrity. Use a hammer to dislodge any non-load-bearing wooden beams or facade elements. A reciprocating saw can also be used to cut through stubborn connections. Note the importance of identifying dummy beams, which can be safely removed without compromising the roof structure. The video demonstrates removing electrical wiring previously connected to an outdoor light fixture, ensuring it's safely disconnected before continuing demolition.

Goal: Remove all non-load-bearing support posts and facade elements.

Tools and materials

  • Hammer — Dislodging beams and fasteners
  • Pry Bar — Prying apart stubborn connections
  • Reciprocating Saw Ryobi — Cutting wooden posts and connections
  • Safety Glasses — Eye protection during demolition

What they say

Hide

turns out. I like how much more spacious it has become here. However, this worries me. I need a nice open passage. As I thought, they are not connected to the rafters of my roof. It's just an extra canopy. I'm going to pull this out to make sure they only start here and go there, and then I'll be pretty sure that this 10 by 4 beam will be enough to support these five little attic rafters. Good news. The good news is that this is a cable that we cut from , well, I think there was an outdoor wall light here, but we cut it to fit under the beveled window. If you haven't seen that episode, watch it. I think you'll like it. But it makes me happy, because if we find it, Ken, I'm going to put my foot here and try to climb up like Spider-Man. Okay. OK. These are rafters, and these are false beams, just to continue this structure. Phenomenal. Then let's get rid of this middle ground.

Auto-generated from the video audio.