Apply Lubricant

Loop to it afterwards will also help to uh stop that from gluing itself together so um one of the things that you know when I you know pull the gun apart I got the needle when I put it back together I would typically add some of that lube stick it back in there cuz I I I thought I was you know adding some lubricant to that Teflon sealing there so is that a good or bad to do it it probably isn't going to make any difference honestly Chris I mean it's it's certainly not going to hurt um because of the oil that we're using um but really not necessary I mean I can't tell you the last time I actually put Lube on that portion of the needle I used to recommend it and some of our older guns we used to use a delin material which is a not a self-lubricating plastic and so it was necessary to have that but with the Teflon you really don't need to have it that's why I recommend really just those two places and then if you are using the OS control on the gun then obviously you want to uh put a little bit of Lube on the threads on this too right okay um but that's really those those parts uh that are just um friction parts right was really all you need to lube all