Project Overview and Initial Assessment

today we're gonna do a little bit of fixing up on newell a few different things first thing would be gluing my rear view mirror back on you can see that one over there the bottom portion on the other side fell off like it fell and the only thing holding on there with the wires that like heat it and I just taped it back on at a truck stop in Arkansas actually when I was on the way back like buying this thing and just now getting to fix it not totally sure but the correct way to do it is correct way I'm just gonna use hot glue because I have hot glue and for my experience it works pretty well for this though probably better than like silicone on top of silicone anyway so there's that and we're gonna try out the old Powerball we're gonna try this white diamond stuff it uh it says on here it's for like polishing aluminum but works great on discolor headlights I tested it on my driver side front headlight over there and it did make a big difference so we're gonna do it on the other headlight and we're gonna try it on these taillights too because they're also kind of fade just a little faith the reverse ones are kind of turning yellow that's not gonna be able to be reversed but it maybe won't be as dull looking doesn't need to be replaced but I think the red ones can be saved maybe we'll even try it on the Duramax see how it does that because those eBay headlights or cons are in yellow also which is stupid because they're like two years old China no so I gotta get an extension cord plug it into an outlet my storage bay and get the hot glue gun and eat it up you can see what I'm talking about pretty clear here it's just like black pretty simple and it's got like piece of aluminum I don't know if this is original or not honestly it could be I've no clue but I'm just gonna clean this up better and reglue it on there how it was and it doesn't work then he's all reliable heater wires will keep it from falling off again but here so I was saying about