Removing and Adjusting the Cutting Blade

together and it's loaded and ready to go. Now the blade, you can see the blade how it sticks up higher than the tape. So you can adjust that blade if you don't want that blade sticking out, you know, that far. It's not a problem having it sticking out too far. If it's not sticking out far enough, it'll cut everything and then all of a sudden um there'll be the p the tape sticking up too high. Then it'll cut it like you'll just randomly tear it someplace. So, you're going to rotate this blade off and you got to be careful. Um right there, just like that. You got to be really careful to rotate it off cuz it's sharp. And um I'll show you how sharp it is. So, um, now I can line it up and it actually tells you right there, you know, the sizes that there's arrows that point to what size P, um, tape you actually line it up to. And it says right there, 90 94 in. That's what I'm using right there. 94 in. Just like that. So, right there to to rotate it off. 94 in. That doesn't sound right. No. 94 mm. Millime. Um, that's a big roller. Yeah. Um. Oh my gosh. That's how sharp it is. Yeah. So, that's how sharp the blade actually is, you know, right there. So, you got to be careful when like you rotating it off. So, um, it just kind of it rotates off. You can take off your paper and rotate your blade. Not grab it by Actually, I grabbed it on the wrong end. It's like I I never change these blades. So, let me Yeah, I'll do So, in order to remove the blade, you're going to grab it from the bottom side like this and rotate it off. So, what you don't want to do when I put it back on, I'm going to put put my fingers underneath, snap it in. What you don't want to do is grab it from this side and rotate it off and snap it off because what happens is you do that. So, just to show you, you know, and give you an example what happens. So, grab it from the bottom side right here. Rotate it and it just comes right