Spraying Door Faces and Panelled Details

2:24

4:25

380.7K views

At 2:24 in

HOW TO SPRAY DOORS. Painting Doors With A Paint Sprayer. Spraying Interior Doors.

Watch on YouTube

What happens here

Next, proceed to spray the main faces of the doors. Maintain a nice, steady speed with approximately a 50% overlap on each pass to ensure full and even coverage. For panel doors, where there are recessed areas and lips, you will need to bend down or adjust your angle to ensure you get underneath these lips. This prevents leaving an unpainted stripe of the previous color. Crucially, do not release or pull the trigger while the gun is pointed at the door face. This can cause 'spits' or uneven paint application. Instead, activate the trigger just before starting your pass over the door's surface and release it only after you have moved past the edge, preferably over the top or on the ground.

Goal: Apply paint smoothly and evenly to the entire face of the door, including any panel details.

Tools and materials

Airless Paint Sprayer Graco — Applying paint
Interior Doors — The primary items to be painted

What they say

(934 characters)

Hide

Now I got all the edges done. Now I'm going to do the faces of the doors. A nice steady speed and a 50% overlap is what you want. You're going to have to bend down a little bit because we got these panels on these doors and these bottom lips right here. If you don't get down, reach down, it won't get underneath that. They'll leave a little stripe of the other color. So, what I'm actually talking about is you don't want your gun pointing out this direction. And it's got to be flat with the face of the door. Another good tip is you actually don't want to release the trigger cuz it'll cause spits. So you can see while I was spraying, I never release the trigger while I'm spraying the face of those doors. Don't release or pull the trigger anywhere on the door itself. You're going to be wanting to start and stop your uh trigger poles over the top of the door or on the bottom of the door down on the ground. It's a good idea to

Auto-generated from the video audio.