Set Lumber Support Bar

loaded with product now we've got our drip cray set down we've got a support bar and this bar it's more of a a height guide to when I'm sending my lumber or pick it in at what angle I want it coming in at I don't want it coming in at an angle like this I don't want it too low where I'm coming in at an upward angle it should be coming in almost completely flat just like that this bar kind of is a guide it kind of gives you an idea you know if you have it set up properly and once again it can be used with um lighter Lumber or material where it can actually set there but what I want is I want my picket or Lumber to come in in and if it's if this bar is too high it's going to come in at a downward angle it's going to hit this first set of back brushes right here too low on the brushes and it's going to cause too much drag so it's going to be right here you can see the the picket is coming down it's hitting really low on the bottom set of brushes I actually want it to just come right through this Gap and so I got to lower my bar so it's going to lower my Lumber so it's going to slide right through this Gap so it's going to evenly back brush it on the top and the bottom and create the least amount of drag so in order to make that adjustment I'm going to lower my bar so now I've got it where it's just about splitting my brushes evenly right there now we're going to work on getting my my