Set Drip Trays

so now I'm going to show you T the typical setup if you're traveling with the machine if you just pulled it off the pallet these um are drip trays are just going to fold right down they're going to set in place just like this there are screws right here that adjust your drip plate height what you don't want is you don't want this thing you know sitting in an angle downward so if anything's dripping on it it's um going to be dripping out that way you want it to go right back into the reservoir of the expert stain machine it does have a a thing right here if you were down the the screw was all the way down more than likely it's um still well it actually does tilt a little bit out that direction so your your um product paint or stain could end up spilling off the side so you definitely want it up slightly so everything is running inside back inside your Reservoir it's got a front one and a back drip tray back here also you don't want it up too high you know cuz then it's going to interfere with feeding your Lumber