Orient Siphon Tube for Spray Direction
At 6:41 in
How to Set Up an HVLP Spray Gun for Furniture Refinishing: A Step-by-Step Guide
What they say
(2,097 characters)Hide
What they say
(2,097 characters)so when it comes to setting up your gun too so I'll just give you a little handy little tip right here so I'm going to release my gun you can see my um intake tube with the screen on it it's facing forward so it's coming down and facing forward you can have it facing in a lot of different directions and actually adjust that you would loosen this up right here and then you would be turn this top right here so I typically I'm spraying you know when I'm spraying down as you start to tilt it down you know the product you're you would actually start if you really low on product you would start to have air right here it's facing towards the back you could end up sucking air and no product would come out so you'd want it to be facing forward as you're spraying downward so a lot of it is just downward you're spraying the top of a piece of furniture at top of the table so more common to have it facing you know downward if you're spraying upside down so if you're starting to turn it upside down like this as you move it you're going to have air right there and you would possibly want it to be facing the opposite direction you'd want it to face up so you see is it is it's SP if it's facing forward that gives me the advantage spraying downward if I'm spraying upside down it's facing upward and if I'm low on product it it can end up sucking there but it's pretty rare that I'm spraying upside down it's most of the time it's downward so I want it set up so it's simple little tip when it comes to you know setting up this ray gun properly and having it you know feeding the direction you want it to feed so now in order to switch this all I got to do I'm just going to loosen up this right here this is going to release I can take the cap right here switch the cap to the bottom going to cap off the top hook up my air valve I just went from siphon feed to a gravity feed cup just like that opposite just unhook your valve take off your cap screw on my siphon feed cut want to make sure Direction I'm pointing so I want I'm pointing forward so forward is right there and to tighten that up
Auto-generated from the video audio.