Adjust Material Flow and Speed During Application

the minus right there so there's no material and I'll start backing it out to get more material and I'll make those adjustments you know as I'm getting this thing set up I do have a dial right here this dial right here this thing is going to turn it from a circular pattern if I open It Wide Open it'll turn it to a wides spray pattern and I can dial it in anywhere in between so it's going to go from circular and begin starting to get wider and wider as I turn it so I turn it counterclockwise it's going to be a small circular pattern and the circular pattern will get smaller and smaller with less material so if I want that circular pattern to get bigger and bigger I'll take and start sending out more material I got my cap right here the cap will rotate where I can take my pattern spray it vertical or spray it horizontal just by simply turning the cap right here I've got a little feature right here this is going to be the pressure uh relief valve right here so when I'm done spraying you know there's pressure in here 7.5 PSI pressure I don't want to just release this and let the pressure come out through there I'm going to turn this little valve it's going to release the pressure out through the valve and then I can open up the gun right there now there are multiple options you can use this is what we call a siphon feed Cup right here this is what I predominantly use or