Skip to main content
Stesso

Basic Joystick Controls (ISO Pattern)

7:59
14:22
581.6K views

At 7:59 in

How to run an Excavator for Beginners. What you Need to know to get started Pt. 1/2

Watch on YouTube

What happens here

Inside the cab, Danny demonstrates the basic controls using the joysticks in ISO pattern. For the left joystick: pushing it forward extends the stick, pulling it back retracts the stick, moving it left rotates the cab to the left, and moving it right rotates the cab to the right. For the right joystick: pulling it back lifts the boom, pushing it forward lowers the boom, moving it left curls the bucket in (holding material), and moving it right dumps the material out of the bucket. These controls are basic on all excavators, but patterns may vary.

Goal: Master the fundamental movements of the excavator arm, stick, and bucket using joysticks in ISO pattern.

Tools and materials

  • Left Joystick Volvo — Controls stick movement and cab swing (ISO pattern)
  • Right Joystick Volvo — Controls boom movement and bucket curl (ISO pattern)
  • Volvo EC140EL Excavator Volvo — To demonstrate joystick controls

What they say

Hide

All right. Dan, what? Okay. Okay. On your left control for ISO control. If you push it forward, the the stick goes out. If you bring it back, the stick comes in. If you move it to the left, it will get rotate the cab. If you go to the right, of course, it goes to the right. On your right control, pull back is up with the boom. Forward is down with the boom. If you go into your leg, left would be curl the bucket so it can hold material in. If you go to your to your right is dump the material out. Okay. Okay. So, that's the control. Okay. So, the power modes, Danny, we're talking about hydraulics and power modes. Uhhuh. You've got I which stands for idle. Yeah, like idle or warm up the machine basically or if you're lifting. F is for like lifting, fine grading. You need to be slow but prec precise movements. G is for like general loading. Okay. And you can use it setting a dial here. So you have G1, G2, G3, and G4. And it's just general everyday loading type applications. If you're in a hurry and you're wanting to load faster, you can go all the way up into H is heavy. You have a lot of flow, but you don't have max pressure. If you get in a bind where you need to bust through hard rock, hard dirt, you can basically push the button here on the joystick and then it it will actually turn on high flow for 9 seconds. And then you can dig through that hard that hard material. Then it

Auto-generated from the video audio.