Skip to main content
Stesso

Starting the Engine and Activating Hydraulics

3:45
13:25
160.9K views

At 3:45 in

How to run a skid steer- Basics from cab, controls & operation for the Noob

Watch on YouTube

What happens here

With the safety measures in place, the trainee is instructed to start the skid steer engine by turning the ignition key. Once the engine is running, the trainer guides her to disengage the parking brake, which is typically a red button, and then to unlock the hydraulics using a specific button marked with a padlock and four arrows. This sequence prepares the machine for full operational movement.

Goal: Start the skid steer and prepare it for movement by disengaging the parking brake and unlocking the hydraulic controls.

Tools and materials

  • Hydraulic Lockout Button — Unlocking the hydraulic system for operation
  • Ignition Key — Starting the engine
  • Parking Brake Button — Disengaging the parking brake

What they say

Hide

unlocked, guys. So, now the machine is is essentially free. So, I'm going to step back here for a second. That's your throttle lever right there for your your your foot throttle. You also have a hand throttle as well. I prefer to use the foot throttle, but if you want to have a fixed throttle, you can set that dial to whatever RPM. Or if you want to have a variable throttle, you can use your foot, similar to a car, and adjust it that way. To go forward, you take that joystick and you move this joystick right here. You move it forward and start moving forward. If you want to stop, you just let go. It's got a spring. It'll come back to neutral. Stop. Let go and stop every time. Then you go backwards, you move it that way. If you want to go left, turn left. If you want to go right, move it move it to the right. And remember, it's called the skid steer because it skids to steer. So these these wheels, they always stay in the same position. just they just skid or drive depending on which direction. So it could be a little jerk.

Auto-generated from the video audio.