Apply Two-Part Sealant to Saw Cuts

filling. So I'm going to begin filling my crack. And you want to make sure you're overfilling it because you got to have something to scrape. Sets up. Once it mixes through this tube, it sets up in 45 minutes to an hour. Once your tube runs out, you just cover it with the tip. And I'll get another tube. When I get close to the outside, I'm going to slow down cuz I don't want a lot pouring outside the door. I just started thinking I stuffed a piece of backer rod. So, I'm just going to give you a simple tip like if when you're moving around, you know, with the product, you know, don't invert your gun upside down because this stuff can start pouring back down inside the tube. tubes and cause it to activate inside the tube. So, keep tip down when you're moving wherever you're going. So, just like this. My tip is down. You don't want to walk with the tip up. So, next crack we're going to move over here. So if you're, you know, attempting to do floor coatings, you know, in the winter time, this product right here that I'm using. Uh, you could actually apply this product all the way down to -20. So, pretty much cold temperatures aren't much of a factor when it comes to this product. If you're doing large projects, you um they do sell this kit for large projects. So they have 10 gallon kits that you can use a machine to actually apply it with. Takes the cost down significantly of the product, you know, per kit. So uh consider that if you're doing large projects.