Securing Loose Deck Boards

everything's all clean I would sit back let the thing dry it's typically the drive to be fast if it's summertime in Beverly you're gonna see some spots that you missed and disco back hit those spots we're gonna see some possibly dirty spots once it dries you'll see clean versus dirty just hit those spots that you missed and then let it dry again and you're ready to get on with a Cody and after it's all dry okay we got our pressure washing all done the deck is dried for about two days now now I want to do some things to tidy up the deck before doing our solid color stain now this decks probably got about five different coats of solid color stain on it and it's also very worn out we've got a lot of loose screws on broken board so we're gonna try to do some fixing and tidying up some of the loose screws and then sanding some of the rough edges before we do the staining I've got a 5-inch dissenter on echis and sander right here gonna be using some 80 grit sandpaper we do got some some areas that were nicked and dinged up it's gonna look a lot better if we go ahead and sand those things and then I got some loose screws and some loose boards and we're gonna be screwing those back in just to tighten the deck up a little bit more so we're gonna start doing some of the sanding right now