Skip to main content
Stesso

Disassemble Nozzle and Locate Gasket

0:54
4:48
4.7K views

At 0:54 in

How to Fix & Repair Your HVLP Spray Gun: Step-by-Step Guide

Watch on YouTube

What happens here

To address the issue, first remove the nozzle from the Apollo 7700 Atomizer spray gun. Once the nozzle is off, the air distributor will be exposed. Inside the air distributor, locate the gasket. The presenter identifies the gasket as being installed upside down, which is the root cause of the loose fan control ring.

Goal: Access the air distributor and the problematic gasket.

Tools and materials

  • Apollo 7700 Atomizer Gun Apollo — The spray gun being disassembled
  • Apollo Gun Tool — Assisting with nozzle removal or gasket extraction if needed, though fingers are preferred for the gasket
  • Gasket Apollo — The component causing the fan control issue

What they say

Hide

different so this fan control ring here the tension on the ring is actually um governed by a gasket that is sits right behind the nozzle here so if I remove the nozzle and inside inside the air distributor is this gasket here and this is a very common problem that we get this gasket has been put in upside down and the reason I can tell that is because the ring was so loose right so

Auto-generated from the video audio.