Disassemble Nozzle and Inspect Gasket

0:47

4:48

4.7K views

At 0:47 in

How to Fix & Repair Your HVLP Spray Gun: Step-by-Step Guide

Watch on YouTube

What happens here

To address the loose fan control ring, first, remove the nozzle from the spray gun. Once the nozzle is off, look inside the air distributor to locate a small gasket. The presenter explains that a very common issue causing the loose ring is this gasket being installed upside down. Use a flat-edged tool, such as the provided gun tool, to carefully pry out the gasket from its position within the air distributor.

Goal: Access and examine the gasket within the air distributor that is causing the loose fan control ring.

Tools and materials

Gun Tool — To carefully remove the gasket from the air distributor

What they say

(538 characters)

Hide

problem very simple most of the most of the issues that happen with the 7700 gun are usually a result of putting one of the parts in backwards this is no different so this fan control ring here the tension on the ring is actually um governed by a gasket that is sits right behind the nozzle here so if I remove the nozzle and inside inside the air distributor is this gasket here and this is a very common problem that we get this gasket has been put in upside down and the reason I can tell that is because the ring was so loose right so

Auto-generated from the video audio.