Skip to main content
Stesso

Clean the Abrasive using the Carpet

0:39
1:12
5.4K views

At 0:39 in

How to fix loaded abrasives? Tips refinishing cabinets! #sandpaper #sander #howto #tips #cabinets

Watch on YouTube

What happens here

With your sander (e.g., an orbital sander or a hand sander with an abrasive pad/sponge) powered on and running, lightly tap or briefly press the loaded abrasive surface against the indoor/outdoor carpet. The carpet fibers will agitate the abrasive surface, effectively dislodging and knocking off accumulated wood dust, paint, or coating product that has clogged the grit. This method is effective for both coated abrasives (like sandpaper) and foam abrasives (like sanding sponges/pads). Continue this process until the abrasive appears cleaner and its cutting efficiency is restored. This simple action helps revive the abrasive, allowing it to perform like new again.

Goal: Remove debris from the abrasive surface

Tools and materials

  • Indoor/Outdoor Carpet Piece N/A — The cleaning mechanism
  • Loaded Sanding Abrasives — The item being actively cleaned
  • Sander — Holding and operating the abrasive during cleaning

What they say

Hide

table, take your sander, tap it with the uh paddle push. Once you tap it, it'll knock all the debris off the face of the uh abrasive. And you can you can do that with coated as well as foam. >> So, that's a that's an interesting tip. So, a Home Depot has like carpet samples. You can actually uh buy a carpet sample. So, I can buy a carpet sample of indoor outdoor carpet. I can have my inspection table where I'm doing my doors. I can just have it sitting there. Anytime it gets loaded up, just clean it

Auto-generated from the video audio.