Final Grading and Surface Loosening

for the homeowner okay so we're about the halfway point through this project so far we've imported between 450 to 500 tons of clay based soil what we're going to be using this soil for is to grade this PL pasture flat so that we get an even Sheen and can direct the water instead of sourcing it funneling it into the the spot where we have the issue evenly across the whole site we've already filled the hole in and the bottom side we're going to go down below we're going to take a couple shots up we're going to show you what we've done to correct the existing problem and now we're going to use the rest of the soils that we've imported in to keep anything from happening down the line so the idea is to grade this out and to stop this problem from happening 5 years down the road or 10 years down the road so you can see that we've filled the hole in we've packed the soil tight and then we've taken the excavator after the fact and we've loosened up the surface soil we don't want to keep the soil packed tight at the very top layer because we need vegetation to reestablish once the vegetation reestablishes any of the small surface issues that could occur will be stopped so the soil has been restored back the slope has been restored back to its natural state and now we're going to be leaving this this area and allowing the vegetation to reestablish so I'm standing in the exact