Install Final Casing and Flush Well

What happens here

Upon reaching the final desired depth of 460 feet and hitting a strong water source, the diamond-tipped drill bit and all drill rods are retracted from the wellbore. Long sections of 6-inch PVC well casing are then carefully lowered into the entire depth of the drilled hole. Each section of PVC casing is securely joined to the next using PVC cement, creating a continuous, watertight pipe that extends from the ground surface down to 5 feet into the water-bearing bedrock. Once all casing is installed and settled, any excess casing extending above the ground is cut flush using a chainsaw. Finally, the newly cased well is thoroughly flushed with compressed air and water to clear out any remaining sediment, rock fragments, and drilling mud, ensuring that the water flowing from the well is clean and clear. The completed well yields approximately 10-12 gallons of water per minute.

Goal: Complete the well infrastructure and ensure clean water flow.