Skip to main content
Stesso

Install Metal Siding Panels

1:55
17:24
46.7K views

At 1:55 in

How NOT to install Metal Siding- PRO tips & Everything you need to know from start to finish pt1 4k

Watch on YouTube

What happens here

Begin installing the vertical metal siding panels. The panels have an overlap side with a small rib that interlocks with the previous panel. Ensure the first panel is perfectly plumb and tight to the J-channel. When placing subsequent panels, make sure the overlap side is tightly engaged with the previous panel's edge. Once aligned, fasten the panels through the designated screw lines into the furring strips, using the specialized color-matched, washer-equipped screws. Work systematically around the building until all walls are covered.

Goal: Cover the building's exterior with new metal siding.

Tools and materials

  • Chalk Line — Ensuring straight screw lines
  • Cordless Drill DeWalt — Driving screws
  • Metal Siding Panels — Exterior cladding
  • Specialized Screws — Fastening siding panels

What they say

Hide

gonna be into the studs every time okay so we're doing something a little different you guys so we're actually going straight up and down with our tin but let's explain to them why we're doing there Frankie Kizza maybe because there may be used to seeing siding going sideways yeah well like this the siding was going sideways too but if you run your tent sideways with the humps in it the humps always get dirty they'll always be dirt on you know and it catches little bits of water and it's just kind of nasty yeah running metal siding straight up and down and if you look at most big buildings there's stuff like that that's way they usually run yeah just because building a stick building they will run a long way deciding but it's it's your preference of what you want how you want

Auto-generated from the video audio.