Install Stone Veneer Panels

What happens here

With the starter strip securely in place, the pre-formed stone veneer panels are now installed. A person selects an individual panel and carefully aligns it, typically starting from one corner or end of the section being covered. The panel is then placed into the top lip of the starter strip (or the previous row of panels) and pressed firmly against the wall. The panels appear to have an interlocking design, fitting together like puzzle pieces both horizontally and vertically. The installer uses hand pressure and a gentle tapping motion with their palm to ensure each panel is fully seated and securely locked into place, creating a continuous and visually appealing stone facade.

Goal: Apply pre-formed stone veneer panels to the building facade.