Skip to main content
Stesso

Final Sanding and Cleaning

2:44
3:34
185.8K views

At 2:44 in

Hide Oak Grain On Cabinets

Watch on YouTube

What happens here

Once 3-4 coats of the grain filler have been applied and allowed to dry completely, perform a final sanding using 320-grit sandpaper. This step is critical for achieving a glass-smooth surface, ensuring the cabinet doors are perfectly prepared for painting. After sanding, clean the doors thoroughly one last time to remove any remaining dust or residue.

Tools and materials

  • Sandpaper — Final fine sanding to create a smooth surface

What they say

Hide

the first coat into the pores allow the material to dry for about thirty and forty minutes before applying the remainder two to four coats depending on your project after three or four coats of the grain filler use 320 grit sandpaper for a final sand to get by the glass smooth ready for paint when painting you can roll it you could spray it a pan and primer combination works fantastic overall I think this project turned out great you could still see some of the grain pattern you just don't

Auto-generated from the video audio.