Perform Sequential (Bump) Nailing Demonstration
2:40
3:33
87 views
At 2:40 in
Hands-On With The Milwaukee M18 FUEL 21-Degree Nailer | Honest Review
What happens here
To use the sequential (bump) nailing mode, first switch the nailer to this setting via the control panel. Hold down the trigger, then quickly and repeatedly press the nailer's nosepiece against the work surface at each desired nailing location. The nailer will fire a nail with each contact. The presenter demonstrates this rapid nailing technique. If nails are not driven to the desired depth, the depth adjustment mechanism (not explicitly shown in this video, but usually a dial near the nosepiece) needs to be adjusted.
Goal: Rapidly drive multiple nails using the sequential firing mode.
Tools and materials
- 20-degree Framing Nails — Nails to be driven into the wood
- Safety Gloves HyFlex — Protecting hands during tool operation
- Wood pieces — The material into which nails are driven for demonstration