Skip to main content

Correct Runs and Debris

2:45
6:54
13K views

At 2:45 in

Hand Brushing Trim To Get Sprayed Results | Brush & Rolling Tips

What happens here

Tools and materials

  • Denatured alcohol

What they say

Hide

underneath there that's where you're more than likely to have run so you want to check that you'll come back before it starts to dry if you start to have a run you know brush it out they start to drive there so one of the secrets to getting rid of runs without without without sand in it is just used denatured alcohol so once this first coat dries if I have any runs anywhere can just rub it out with the nature alcohol without sanding it and then repaint right over it this is a um vinyl bbard so it's a paintable vinyl really smooth so it's not going to absorb paint so um it's more likely to run than a prime wood which would actually absorb the paint itself on the baseboard I'm going to be going baseboard trailing chair railing I'm going to be going you know with the grain of the wood on the beadboard it's up and down I don't want to brush it Crossways anywhere it's all up and down if you get anything in the paint you want to get it out look there's a little hair but what I see you know most frustration especially with do it-yourself where that don't have a lot of experience brushing and rolling trim is they'll continue to work it I got it on laid it out move off move on so if

Auto-generated from the video audio.