Skip to main content
Stesso

Preparation and Filling of Cracks

0:59
1:32
2.6K views

At 0:59 in

Getting that perfect garage floor! Torginol Hybrid Flaked resinous floors. #DIY #homeimprovement

Watch on YouTube

What happens here

Address any remaining cracks in the floor by first using a specialized crack chasing tool (as seen at 1:10) to open them up. This tool helps create a clean, V-shaped channel for proper filler adhesion. Many cracks were also offset or had old filler, necessitating this step. Following the chasing, hand grind the edges of the chased cracks to ensure a clean surface. Once prepared, fill the cracks with a suitable filler (like the liquid green material shown between 0:18 and 1:03), ensuring it penetrates deep into the crack and creates a smooth, level patch. This prevents the cracks from reappearing through the new floor coating.

Goal: Clean, prepare, and fill all floor cracks to create a stable and uniform surface.

Tools and materials

  • Crack Chasing Tool — Opening and cleaning cracks to prepare them for filler application
  • Hand Grinder — Grinding the edges of chased cracks for a clean finish
  • Personal Protective Equipment — Protecting eyes, ears, and lungs during crack preparation and filling
  • Squeegee or Trowel — Applying and leveling the crack filler
  • Crack Filler Sherwin Williams — Filling and sealing prepared cracks in the concrete floor

What they say

Hide

There was cracks all over, and the cracks were uh kind of like offset a little bit. They were also filled with a filler, so used our crack chasing tool, chased them all, and then hand ground them before we ran our on-floor grinder

Auto-generated from the video audio.