Skip to main content
Stesso

Dry and Test Gel Stain for Curing

6:39
10:27
503K views

At 6:39 in

Gel Staining Fiberglass Doors. How to use Gel Stains.

Watch on YouTube

What happens here

After applying the gel stain, allow it to dry for at least 6 to 8 hours. To test for proper curing and readiness for a clear coat, take a clean rag dampened with mineral spirits or paint thinner. Lightly rub the rag over a small, inconspicuous area of the stained door. If any stain comes off onto the rag, the stain has not yet fully dried and cured, and more drying time is needed before applying a clear coat. This ensures the clear coat adheres properly and doesn't lift or smudge the stain.

Goal: Ensure the gel stain is fully cured and ready for clear coating.

Tools and materials

  • Rag — Testing the dryness of the gel stain
  • Mineral spirits — Testing the gel stain for dryness before clear coating

What they say

Hide

hinges, masked off with frog tape. Once we get this door gel stain, it's got to dry 6 to 8 hours and then we'll actually test it to make sure it's ready to be clear coated. We're going to test it by just taking some mineral spirits on a rag or paint thinner. And then you'll just rub that rag onto the door. And if it takes off any of the stain, then the stain hasn't dried and cured

Auto-generated from the video audio.