Skip to main content

Restore Water Supply and Check for Leaks

5:46
8:07
2.7K views

At 5:46 in

Frost Free Hose Bib Replacement in a Tight Space

What happens here

Slowly and cautiously open the main water shut-off valve just a small amount to allow water to gradually re-enter the system. Listen for any sounds of rushing water or drips. Go to the interior access point and visually inspect all new connections (ProPress and PEX) for any signs of leaks. Also, check the exterior around the new hose bib. Open an interior faucet (like a bathroom or kitchen sink) to bleed any air out of the lines. Once satisfied that there are no leaks and air has been purged, fully open the main water valve.

Goal: Safely restore water to the house and confirm all new plumbing connections are watertight.

Tools and materials

  • Main Water Shut-off Valve — Restoring water to the house

What they say

Hide

go. We'll turn on the water and barely open this valve. You don't want to run a lot of water at once, but you need to fill the system. OK? So we'll just let everything fill up slowly and then check. We already have some water coming to the faucet in the basement. That's all. Air is coming out of the basement . Now some water has gone. So you know the lower pipes are full. Good? Let's continue. We'll turn it off and go upstairs. The upper floor is also starting to fill up. Let's give you some more water. Let's go check the outside faucet. Let's turn it on. Here, we've run out of water. We've worked with this before. This is, in fact , a quarter-turn shut-off valve. Very convenient. We can just open it completely. And everything is ready. You see, you don't hear any noise or anything like that anymore. Everything is fine. It's working again. Everything is running. Toilet tanks are filling up. Let me come closer. I'll look around. I don't see any leaks at all. Everything looks very good. Take a look for yourself. Full water pressure. No leaks. Everything looks great. I would

Auto-generated from the video audio.