Secure Beam in Joist Hangers

What happens here

Once the beam is at the correct height, a worker on a stable ladder should carefully guide each end of the beam into the pre-installed joist hangers. This may require gentle manipulation, adjusting the lift slightly up or down, and nudging the beam until it drops fully into the hangers. Use a hammer to lightly tap the ends of the beam if necessary to ensure it's fully seated and flush against the back of the hanger. Verify that the beam is level across its entire length and that it sits snugly within both joist hangers.

Goal: Guide and fully seat the main beam into the joist hangers, ensuring a secure fit.