Permanently Install Coping Stones

What happens here

Although the video primarily focuses on the dry-fitting, the 'installation' implies permanently securing the coping stones. Once the dry-fitting is complete and all necessary adjustments have been made, apply a suitable outdoor-grade masonry adhesive or mortar to the underside of each dark gray coping stone. Carefully place each stone back into its pre-determined position on the fire pit base, pressing firmly to ensure good adhesion. Continuously use the level to re-check alignment and levelness as you place each stone. If using mortar, ensure consistent joint thickness. Any excess adhesive or mortar that squeezes out should be wiped away immediately with a damp sponge or cloth to prevent staining and ensure a clean finish. This step concludes the structural and aesthetic construction of the fire pit's upper edge.

Goal: Securely attach the coping stones to the fire pit base.