Fastest way to cut crown molding like a PRO in minutes 👑✂️

So, this is the only system in the world that makes anybody cut crown molding perfectly. Okay? It's a three-step system. That's all you need to know. Three simple steps. So, what I'm going to do is I'm going to start with the cut and then I'll go back and show you the three steps quickly. Remember, the only p possible way to make a perfect cut every time is to continue to do the same thing you're doing in reverse back and forth. So, with this system, you put it in the jig, make the cut. When you want to make the opposite cut, don't move the saw. Reverse the jig. If you do that, you'll be faster and it'll be perfect every time. So, it's the only system that makes anybody perfect without even trying because it's the technique, not the person. Okay? All right. Three steps. The first step is to figure out what spring angle you have. And then all you have to do is simply use the right jig. So, there's a 38, there's a 45, and there's a 52. So, step one, use the right jig. Step two, special protractor comes in the kit. You have to know what your corner angle is or you can't fix it. So measure your corner inside or out. Read the arrow that says corner. Divide that number by two. That's your saw setting. So if your corner is 88, set your saw to 44. You're going to make a perfect 88. The third step is to eliminate having to think upside down and backwards. That's where most mistakes are made. So we have a picture system right on the back. So all you have to do, use the right jig, measure your corner, follow the pictures, you'll get it right. The last problem I had to fix was when you buy your molding and it's long and flimsy, it's going to fall off your stand. So, I have a special roller system that holds your molding for you just like it sets in the jig. And when you spin the jig to make the opposing cut, it goes right in the other side. So, that's why we say cutting crown molding is as easy as one, two, three. Three-step system, perfect cuts. You can only get it in one place. You have to go to outlawtoolco.com and you can order it right online or you can find me at a