Mount Ecobee Backplate and Connect Wires

cover back in and go inside so it looks like all that's left to do is take the mounting plate which goes right well feeds the wires right through it secure top to bottom and then feed it into the according slots so this is a W we find V W so if you know anything about me you know that I'm always screwing up on things and right now there's a screw up when I said hey just connect everything back to where it was a plug it in I was wrong step 14 says take your stickers go to your thermostat take the old title stickers off and place the new ones on not the same ones but it kind of directs you which one goes where because we did a little rewiring with a little power unit so let's follow the instructions this is where it's handy to reference back to your picture they took so here's the combination that you have to do so we have the RH which is right here Black Label Black Label remove the RC cnpk so rh c and r those are the only ones so RH I don't have C or R you know we're gonna put the sticker RC on it okay G get to see I used my C white one for the outside already for the so this is my only see left so that was my mistake and why it gets a PK so now the Board says RC and my cable says RC & rh that's the one that goes in there G which is also C now is going to go into C Y which is also PKS I'm going to PK and W is just gonna go in W okay let's go hit the