Efficient Sanding with Orbital Sander

0:15

1:07

37.9K views

At 0:15 in

Easy epoxy floors anyone can do! #epoxy #garagefloors #epoxyfloor #metallicfloor #floorideas

Watch on YouTube

What happens here

This step details the process of preparing an existing epoxy floor by sanding it down. The presenter explicitly recommends using a 6-inch or 5-inch orbital sander (referred to as an "Echisan" sander, likely a common mispronunciation of a brand like Festool or Mirka) equipped with a Filmtech 120-grit plastic abrasive. The purpose of this sanding is to remove any existing bubbles, debris, or imperfections in the current coating, creating a smooth, clean, and scuffed surface that will ensure proper adhesion for the subsequent metallic epoxy pour. The presenter states that this method can efficiently prepare a three-car garage in approximately 30 to 40 minutes. He is shown demonstrating the sanding process while wearing a respirator, gloves, and knee pads for safety and comfort.

Goal: Achieve a smooth, clean, and well-abraded surface ready for metallic epoxy application.

What they say

(789 characters)

Hide

know, if you're new to epoxy floors, if you don't have access to all the expensive equipment, swing um swing machines, etc. to do the sanding upright. You know, if you're a painter and you have an Echisan 6-in sander or 5-in sander, all you need is some Film Tech Filmtech, you know, plastic abrasive, 120 abrasive, and you can sand your floors with an Echoan sander. This is what I'm using. It's only going to take me, you know, probably 30 to 40 minutes to do this uh threecar garage. So, you don't need all the fancy elaborate equipment that that the big epoxy floor companies have. If you're a painter starting out a business, this is all you need, you know, to uh do the prep process. I'm sanding out any bubbles, any debris, you know, in this coating, getting it ready to do our pour

Auto-generated from the video audio.