Position PVC Pipe as Scraper Blade
At 0:00 in
Easiest Method for Plowing difficult Spots 👍 #landscape #diy #snow #coldweather
What happens here
Begin by selecting a suitable length of PVC pipe, typically 2-4 inches in diameter, that is wide enough to span the cutting edge of your loader bucket. Place this PVC pipe horizontally on the ground or the surface you intend to clear. Carefully maneuver the loader so that its bucket is positioned directly above the PVC pipe. Then, slowly lower the loader bucket onto the pipe, using the weight of the bucket to firmly hold the pipe against the ground. This action effectively transforms the flexible PVC pipe into a temporary, non-damaging scraping blade that works beneath the metal edge of the bucket.
Goal: Create a flexible, temporary scraping edge for the loader bucket
Tools and materials
- Gloves DeWalt — To protect hands while handling the PVC pipe and operating the loader
- Loader Bucket Bobcat — To hold the PVC pipe against the ground and perform the scraping action
- PVC Pipe — To act as a flexible, non-damaging scraper blade for the loader bucket